Basic Introduction
Galvanized steel Non-pressurized Solar Energy Water Heating Solar Hot Water Storage Tank Water Heater
Features:
1. Cheap and reliable solution, Simple structures, Easy installation.
2. High efficiency of heating,water heated by sun light directly.
3. Withstands water pressure no more than 0.1MPa.
4. Operated without any power supplying.
5. Electric heater can be used as back-up in rainy days.
6. Hot water can be used directly, or can be used as a pre-heated.
7. Water flow in the vacuum tubes and is operated when confined.
8. Tank is equipped with electric water heater setting, automatic temperature controller(optional ).
9. the insulating layer uses polyurethane bulk bubble,keep hot water 72 hours.
Specifications:
1.Inner tank: SUS304-2B,SUS316L,0.31mm,0.4mm,0.5mm
2.Outer tank:Galvanized Steel
3.Tank capacity:80L/100L/120L/150L/180L/200L/240L/250L/300L/320L/360L
4.Vacuum tube:58*1800mm Borosilicate Glass 3.3; Al-Ss-Cu Absorb Coating
5.Stand:Galvanized Steel, 1.5mm; 20-45 degree
6.Insulation layer: 50mm,55mm,60mm
7. Optional accessories : Electric heating, Intelligent controller, Mg. Rod, 3L/5L/8L assistant tank
Remark:
1.Solar hot storage tank diameter(mm): 460mm,470mm,480mm
2.Thickness, insulated(mm): 50/55/60
3.Vent connection(inch):1/2'' or 3/4''
4.Electric heater connection(mm): 47,1/2", 3/4"or 1"
5.Water connection(inch): 1/2'' or 3/4''
6.Collector angle(degree): 20-45 degree
Low Pressure Solar Water Heater TANK :
1.Inner tank:Stainless Steel SUS304 |
2.Vacuum tube:QB-AL-N/AL-47*1500/58*1800 |
3.Outer tank:stainless steel SUS304/SUS316/PVDF color steel |
4.Frame:coated galvanized steel-1.5mm:Aliminum alloy steel 2.0mm |
5.The material of insulation:polyurethane50/60mm |