2 Litre Vertical Stainless Steel Accumulator Pressure Vessel for Pumps

• Customization: Available
• Max.Head: >150m
• Max.Capacity: 300-400 L/min
• Model NO.: TY-03-2L-S-10-009
• Material: Stainless Steel
• Structure: Multistage Pump
• Assembly: Booster Pump
• Power: Hydraulic
• Start Up: Electric Pump
• Type: Jet Pump
• Application: Submersible Pump
• Industry: Food Pumps
• Media: Booster Pump
• Performance: Sanitary Pumps
• Theory: Jet Pump
• Vessel Capacity: 2 L
• Tank Diameter: 140 mm
• Tank Height: 196 mm
• Weight: 1.1kg
• Max. Working Pressure: 10 Bar
• Max. Operating Temperature: 70° C
• Factory Pre-Charge: 3.5 Bar
• System Suitability: Suitable for All Types of Potable Water System
• Connections: 1/2" Mbsp
• Shell: Stainless Steel
• Membrane: Butyl
• Flange: Stainless Steel
• Pre-Charge: Nitrogen Gas
• Range Description: Inox Dezhi Series
• Steel One: Also Available
• Transport Package: Paper Box Packing
• Specification: 10/16/20/25/35 BAR Wroking Pressure
• Trademark: Aqualeader/Dezhi
• Origin: China
• HS Code: 9032900090
• Production Capacity: 2400 Units Per Day

Product Description

Basic Introduction
Hydraulic shock (colloquial: water hammer; fluid hammer) is a pressure surge or wave caused when a fluid, usually a liquid but sometimes also a gas, in motion is forced to stop or change direction suddenly, a momentum change. This phenomenon commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe.

This pressure wave can cause major problems, from noise and vibration to pipe collapse. It is possible to reduce the effects of the water hammer pulses with accumulators, expansion tanks, surge tanks, blowoff valves, and other features.

Mini potable expansion vessel, suitable for use as a water hammer shock arrestor. Stops pressure changes across water systems causing pipes to bang. The expansion vessel shock arrestor should be installed close to taps, valves and appliances in order to minimise the effect of shock on the system.





Company profile

Taizhou Tianyang Electrical co.,LTD. Is located in Shangma industrial Zone,Shitang Town,WenlingCity,Zhejiang rovince,covering an area of 15,000 square meters.Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company.We have produced pressure tank for more than 20 years.Available volumes range from 0.15 to 1500 liters.and working pressure from 4 bar to 25bar. Our products are applied to pump systems .Our products are exported to numerous overseas clients.We can custom design and manufacture products according to client-supplied requirements.
We adhere to the business philosphy"Credibility,Quality and service",our scientific management is based on the domestic market, but facing to the world.Warmly welcome customers both domestic and from abroad.We sincerely hope to cooperate and develop together to create a better future.
Taizhou Tianyang Electrical Co.,Ltd. Is always your most loyal partner.

I would like to take this opportunity to introduce our company to you. I am contacting you on behalf of Taizhou Tianyang Electrical Co., LTD. We are the factory from China for making Pressure Tanks for Fire Protection,Residential Water and Irrigation, Sport Turf and Landscape Irrigation, Agriculture and Horticulture Irrigation, Water Filtration, Treatment & Recycle, Solar and Stock Water System, Rain Water Harvesting, Pump Systems. Based on ISO quality management system, we have obtained CE,  KC, ISO 9001, ISO14001, OHSAS 18001, SGS, Water Mark, and Wras Certificates for our company & our Pressure Tanks. Welcome to visit Taizhou Tianyang  Electrical Co.,LTD when it is more convenient for you.




Dezhi offer a complete range of mini expansion vessels for use with potable water in domestic hot and cold water systems.The expansion vessels are manufactured to meet the requirements of PED 97/23/EC Directive 'Closed expansion vessels with built in bladder for installation in water'.
Design
Manufactured in Noryl plastic or stainless steel .Pre-pressurised air chamber with synthetic rubber compound bladder.The internal surface of the vessels in contact with the water are resistant to corrosion, thus maintaining water quality External surfaces are black or a natural finish for stainless steel.Suitable for temperatures up to 90˚C, resistant to ethylene or propylene glycol mixtures and has low gas permeability.

Dezhi mini expansion vessels are all tested according to the Pressure Systems Directive.

POTABLE WATER SHOCK ARRESTORS

Water hammer is caused during a pressure surge within a potable water system. The hammer is caused by a sudden stop or change of water flow within the system and is extremely common in domestic plumbing. Water hammer usually happens when the pressure within the system is too high - our water shock arrestor range will help to prevent water hammer. Our compact shock arrestor mini expansion vessel can be fitted at the point of use in order to prevent water hammer within the system.

How It Works
In a closed hot water circuit, the water cannot be compressed so any increase in volume, created by an increase in temperature, has to be accommodated by an expansion vessel.
When water is cold, the pre-charge pressure forces the bladder to collapse until the pump is started when the bladder starts to inflate.
As the temperature in the system increases, with the associated increase in pressure and volume, the expanded water enters the
bladder creating additional volume and lowering the pressure.When the temperature decreases, the pre-charge pressure forces the
water from the bladder and back into the main water circuit.
Service and Maintenance

Taizhou Tianyang  Electrical Co.,LTD recommend that the air pressure is checked annually and adjusted if necessary. This can be done using an air pressure gauge and foot pump.

Application


Technical Parameter 
 

Model	Tank Volume	Maxi Working Pressure	Diameter	Height	Connector	Package
x	Liter	Bar	mm	mm	Inch	cm
TY-03-0.5L-S	0.5	10/16	96	160	1/2	18.5X32X39/40 Pcs
TY-03-1L-S	1	10/16	115	195	1/2	58x39.5x23.5/20Pcs
TY-03-2L-S	2	10/16	140	235	1/2	48.5x57x28.5/16 Pcs
TY-03-2L-SA	2	10/16	140	163	1/2	43x33x29/12 Pcs
TY-04-5L-S	5	10/16	155	300	1	17x17x31
TY-04-8L-S	8	10/16	200	340	1	21x21xx34
TY-04-12L-S	12	10/16	270	350	1	27.5x27.5x35
TY-04-19L-S	19	10/16	270	410	1	27.5x27.5x41
TY-04-24L-S	24	10/16	270	460	1	27.5x27.5x46
TY-06-36L-S	36	10/16	350	560	1	35x35x56
TY-06-50L-S	50	10/16	350	670	1	35x35x67
TY-06-60L-S	60	10/16	450	750	1	45x45x75
TY-06-80L-S	80	10/16	450	890	1	45x45x89
TY-06-100L-S	100	10/16	450	940	1	45x45x94
TY-07-180L-S	180	10/16	560	1000	1^1/2,2	56x56x100
TY-07-200L-S	200	10/16	650	970	1^1/2,2	65x65x97
TY-07-300L-S	300	10/16	720	1260	1^1/2,2	72x72x126
TY-07-500L-S	500	10/16	750	1500	1^1/2,2	75x75x150
TY-07-750L-S	750	10/16	750	1800	1^1/2,2	75x75x180
TY-07-1000L-S	1000	10/16	1000	1800	1^1/2,2	1000x100x180
TY-07-1500L-S	1500	10/16	1100	2000	1^1/2,2	110x110x200
TY-07-2000L-S	Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)					Non-fumigation wooden case/Or Pallet
TY-08-8L-S	8	10/16	240	330	3/4	24x24x34
TY-08-12L-S	12	10/16	270	340	1/2	27x27x35
TY-08-19L-S	19	10/16	410	290	1	41x41x30
TY-08-24L-S	24	10/16	460	290	1	46x46x30
TY-08-36L-S	36	10/16	380	490	1	38x38x50
TY-08-50L-S	50	10/16	380	560	1	38x38x57
TY-08-60L-S	60	10/16	480	490	1	48x48x50
TY-08-80L-S	80	10/16	480	630	1	48x48x64
TY-08-100L-S	100	10/16	480	720	1	48x48x73
TY-08-150L-S	150	10/16	Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)			Non-fumigation wooden case/Or Pallet
TY-08-200L-S	200	10/16
TY-08-250L-S	250	10/16
TY-08-300L-S	300	10/16
TY-08-400L-S	400	10/16
TY-08-500L-S	500	10/16
TY-08-600L-S	600	10/16
TY-08-750L-S	750	10/16
TY-08-1000L-S	1000	10/16
TY-08-1500L-S	1500	10/16

FAQ Details: 

   1.Q: What is your MOQ of this item?    
      A: We are a factory, have stock. 1PCS is ok!

   2.Q: What is the delivery time?     
      A: 7-25 days after receiving orginal L/C or deposit by TT.

   3.Q: Is it all right to make customer's own brand name?
      A: Yes we supply OEM service. Please send us a authorization doc.

   4.Q: Where is your Loading Port?
      A: Ningbo, Zhejiang, China.

   5.Q: What are your payment terms?For Bulk Quantity Purchase
      A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
      For Samll amount Trial Order ,Please arrange the full payment 

   6.Q: What is your company's available production capacity?
      A:  50000~60000 pieces of  Pressure Tank per month.

Welcome To Visit Us